PRM-TAIWÁN

Alternar la máquina de moldeo por inyección de ahorro de energía Servo 90E a Servo 570E

Clasificación: Productos
País: Taiwán
Teléfono: 886-6-2330519
Fax: 886-6-2330398
Persona de contacto: Joseph Lung
Consulta Ahora
Modelo Tamaño internacional Volumen de disparo teórico Fuerza de sujecion Espacio entre barras de unión Molde de apertura de golpe
Servo 90E 900H-326 183 90 360x360 330
Servo 120E 1200H-435 251 120 395x395 380
Servo 150E 1500H-614 366 150 425x425 430
Servo 190E 1900H-760 491 190 470x470 480
Servo 230E 2300H-958 641 230 515x515 525
Servo 270E 2700H-1423 848 270 555x555 570
Servo 320E 3200H-1703 1062 320 620x620 620
Servo 370E 3700H-2045 1308 370 700x650 670
Servo 470E 4700H-2862 1910 470 770x742 770
Servo 570E 5700H-4462 3083 570 860x800 860


AHORRAR ENERGÍA = SALVAR NUESTRA TIERRA

Según varias configuraciones de términos de moldeo, Servo E consume un 40% menos de energía que la máquina con una bomba de desplazamiento variable o inversor, y en promedio un 60% menos en comparación con la máquina con una bomba de desplazamiento fijo.



LESS VOLUME OF OIL & COOLING WATER CONSUMED

Servo E has no issues of oil heat generation caused by the flow relief valve in the IMM with a fixed pump, or oil draining by the IMM with a variable pump, so a smaller capacity of heat exchange and less volume of cooling water are required. The oil consumption is cut in half so, the oil storage and the cost of refilling are lower. The standard hydraulic design of the logic circuit shortens the response moment of the hydraulics and achieves pressure/speed control precisely.