English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Máquina peletizadora de alta velocidad de doble cono - Corte bajo el agua
CATEGORÍAS : Líneas de peletización y composición
Adecuado para materias primas con alta viscosidades como el PP, PMMA, TPU, PU, PLA, PET Y etc. Materias primas con alta viscosidad, Alta capacidad. Bajo consumo de electricidad. Fácil cambio de materiales. Amasado apropiado y fácil de limpiar, Tipo de cortado bajo agua.
Cortadora de papel
CATEGORÍAS : Máquinas de corte
● Tolerancia de corte: +-0,5 MM ● Velocidad de la máquina: 200 M/MIN
Máquina económica para hacer bolsas de camisetas de alta velocidad (sistema de corte en caliente) PV
CATEGORÍAS : Máquinas para fabricación de bolsas por aplicación
Sistema de corte en caliente de alta velocidad: para bolsos de camisetas impresas. La fotocélula y el servo registran una posición de impresión precisa. Sistema de corte en caliente de alta velocidad disponible en sistemas de 200/250 / 300rpm. Colección manual: sistema económico sin pinza y punzón neumático. La mano de obra recoge las pilas bloqueadas y perfora manualmente mediante un punzón neumático fuera de línea.
E waste recycling system
CATEGORÍAS : Líneas de lavado y clasificación
The plastic wash line system is designed for mixed rigid plastics washing and separation. Minimizing the recycling water flow rate and evaporation losses. The shredding system is with wear resistant design to maximize the consistent running of the system and minimize operational costs. High speed washing system with corresponding speed according to the material type liberates contamination from the plastic. The underwater force-washing paddle of the washing tank maximize the washing efficiency. Mechanical and thermal drying system minimize the moisture content of the end product. Shredding, high speed washing and drying is optimized to avoid over processing, which causes material loss (fines creation). Mechanical (centrifugal and squeezing) and thermal drying systems control the moisture content of the finished product. System automation makes sure the components actions are linked, the system capacity is maximized, and that the system is suitably protected against interfering material. Customized 316 stainless steel system is optional for corrosive material washing. NIR, Color, X-ray or Electrostatic sorters can be provided according to the material type and separation requirements.
Máquina de mascarilla médica tipo bucle de oreja de alta velocidad 1 + 1
CATEGORÍAS : Máquinas para fabricación de bolsas por aplicación
The MGA-MSK-400-S8 is a high-speed 1+1 ear-loop face-out type medical mask machine that converts non-woven and melt-blown fabric rolls into finished masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It draws material from four unwinding stations feeding non-woven and melt-blown materials, with a nose bridge flattening device supporting mask quality.The ultrasonic welding device is Taiwan-made, and servo-controlled ear-loop cutting keeps pace with production speed. Eight servo motor sets drive the machine, and an automatic conveyor moves counted, stacked masks smoothly to packaging.Model: MGA-MSK-400-S8Mask size: 175 x 95 mm or 145 x 95 mm (machine produces one size only)Output: 65 - 95 pcs/minMachine dimension: 4,500 (L) x 2,430 (W) x 1,988 (H) mmNet weight: 800 kgPower consumption: 9 kwPower input: 220V, single phaseServo motors: 8 sets
Máquina para fabricar máscaras tipo pez KF94 de alta velocidad
CATEGORÍAS : Máquinas para fabricación de bolsas por aplicación
The MGA-MSK-KF94 is a high-speed KF94 fish type mask making machine that converts non-woven fabric rolls into finished KF94-shaped masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It is equipped with two sets of 15kHz 2600W ultrasonic systems and two sets of 20kHz ultrasonics for efficient mask welding, plus a rotating cutting roll designed specifically for the fish mask shape.The ear loop welding station uses 11 servo motors for precise control, and a high-level PLC with virtual angle control synchronizes each motor's working angle for accurate ear loop welding placement.Model: MGA-MSK-KF94Mask design: KF94 Fish Type MaskOutput: 60 - 95 pcs/minMachine dimension: 6,735 (L) x 3,231 (W) x 2,000 (H) mmMachine weight: 2,500 kgRequired power: 6 kwUltrasonic welding: 2 x 15kHz 2600W + 2 x 20kHz systemsEar loop welding: 11 servo motors, PLC virtual angle control
Máquina para fabricar bolsas con asa de bucle de alta velocidad con selladores continuos LY-800HLC
CATEGORÍAS : Máquinas para fabricar bolsas plásticas
LY-800HLC es una máquina de fabricación de bolsas de bucle suave especializada de ultra alta velocidad. Está equipado con 5 juegos de servomotores para mostrar su excelente rendimiento. El sellador continuo único proporciona un sellado superior de alta eficiencia y buena calidad. La interfaz hombre-máquina es parte estándar para una operación fácil y amigable.
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-35
CATEGORÍAS : Extrusoras de Película Soplada
The KML-35 is an LDPE/LLDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-35 processes film in 0.015-0.15 mm thickness at up to 500 mm width, with output between 10-30 kgs/hr.The extruder runs a Ø 35mm screw at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel, driven by an AC 10 HP motor with inverter. The die unit uses a Ø100 mm die with a Ø150 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KML-35Suitable material: LDPE/LLDPEFilm thickness: 0.015-0.15 mmFilm width range: 500 mmFilm output: 10-30 kgs/hrScrew diameter: Ø 35mm, L/D ratio 26:1Driving motor: AC 10 HP + InverterMachine dimension: 400×120×380 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-80
CATEGORÍAS : Extrusoras de Película Soplada
The KML-80 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film up to 2,000 mm wide for applications such as plastic farm film and car film.The extruder unit is fitted with an Ø80mm screw at a 30:1 L/D ratio and a 75 HP AC driving motor with inverter, supported by 7-zone auto thermo control. The die unit uses an Ø500mm die and Ø550mm air ring, and the take-up unit runs at speeds up to 45 m/min across the 2000 mm effective width.Model: KML-80Suitable material: LDPE/LLDPEFilm thickness: 0.03-0.15 mmFilm width range: 2000 mmFilm output: 200 kgs/hrScrew diameter/type: Ø80mm, L/D ratio 30:1Driving motor: AC 75 HP + InverterTake-up speed: 45 m/minMachine dimension: 800×500×900 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-120
CATEGORÍAS : Extrusoras de Película Soplada
The KML-120 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film in a width range of 1800-3000 mm for applications such as plastic farm film.The extruder unit is fitted with an Ø120mm screw at a 30:1 L/D ratio and a 150 HP AC driving motor with inverter, supported by 8-zone auto thermo control. The die unit uses an Ø750mm die and Ø800mm air ring, and the take-up unit runs at speeds up to 22 m/min across the 3000 mm effective width.Model: KML-120Suitable material: LDPE/LLDPEFilm thickness: 0.05-0.15 mmFilm width range: 1800-3000 mmFilm output: 280 kgs/hrScrew diameter/type: Ø120mm, L/D ratio 30:1Driving motor: AC 150 HP + InverterTake-up speed: 22 m/minMachine dimension: 16.5×7×10 m
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-25
CATEGORÍAS : Extrusoras de Película Soplada
The KML-25 is a compact LDPE/LLDPE blown film extrusion line for narrow-width film production, including applications such as car film. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring, then wound. The KML-25 produces film in 0.015-0.10 mm thickness and up to 150 mm width, with output between 5-15 kgs/hr.The extruder runs a Ø 25 mm screw at a 26:1 L/D ratio with 2-zone auto thermo control on the barrel, driven by an AC 3 HP motor with inverter. The die unit uses a Ø40 mm die with a Ø100 mm air ring, and the take-up section operates at speeds up to 45 m/min.Model: KML-25Suitable material: LDPE/LLDPEFilm thickness: 0.015-0.10 mmFilm width range: 150 mmFilm output: 5-15 kgs/hrScrew diameter: Ø 25 mm, L/D ratio 26:1Driving motor: AC 3 HP + InverterMachine dimension: 150×70×250 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-45/55
CATEGORÍAS : Extrusoras de Película Soplada
The KML-45/55 is an LDPE/LLDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film before take-up and winding. The KML-45 produces film up to 650 mm width and the KML-55 between 400-1000 mm width, both in 0.02-0.15 mm thickness.The KML-45 runs a Ø 45mm screw and the KML-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KML-45 and AC 30 HP for the KML-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling.Models: KML-45 / KML-55Suitable material: LDPE/LLDPEFilm thickness: 0.02-0.15 mm (both models)Film width range: 650 mm (KML-45) / 400-1000 mm (KML-55)Film output: 20-55 kgs/hr (KML-45) / 30-72 kgs/hr (KML-55)Screw diameter: Ø 45mm (KML-45) / Ø 55mm (KML-55), L/D ratio 26:1Driving motor: AC 20 HP + Inverter (KML-45) / AC 30 HP + Inverter (KML-55)Machine dimension: 470×165×400 cm (KML-45) / 500×220×450 cm (KML-55)