Sistema central de transporte de material

Clasificación: Sistema automático

YANN BANG ELECTRICAL MACHINERY CO., LTD.

País: Taiwán

Teléfono: ENGLISH: 886-4-2271-0000 | 中文：886-4-22716999

Fax: 886-4-2271-1988

Persona de contacto: Bunny Tsai

Vídeo Consulta Ahora

Nuestro sistema de transporte de vacío central también se llama sistema de suministro neumático centralizado. Se puede personalizar completamente para su procesamiento de plásticos para cumplir el objetivo de operación continua sin tiempos de inactividad.

Un sistema de transporte central puede controlar 30 conjuntos de máquinas de moldeo al mismo tiempo y recuperar su inversión en 2 o 3 años.

Mejor imagen de empresa
Mayor productividad
Costo más bajo
Mejor eficiencia energética
Menos desperdicio de material y contaminación durante el proceso de transporte
Mejor ambiente de trabajo
Menos ruido debido a la separación de los sopladores del lugar de trabajo

Suction Hopper

Standard Series (HS)

By negative pressure principle, convey the raw material into the hopper controlled by the limited switch.

Glass series (GS)

Fitted with a proximity switch to make the accurate control and the material supply easily observed. It can be mounted directly onto the molding machine and gives the operator a clear view of the loading through the sight glass.

Stainless Series for Optics (HS-S/GS-S)

The stainless suction hopper which is internal buffed is dust-free and best choice for optics industry.

Booster Series (HS-E)

Flexible Hopper design to increase or decrease your hourly capacity is economic and user-friendly.

Dust-Free Filter Hopper for optics (HDF)

During conveying, dust and resin are separated. To compare with other air filter, it can increase 300% efficiency to de-dust. Stainless design with transparent tempered glass gives a clear view of the loading, and it is perfect for optics need of dust-free.

Powder Series (HSP)

Working with a floor-type auto loader (TAE series) .It is the best choice for powder user. Available for powder, pellet or flake resin. Both new and recycled material are no problem. Special design to prevent dust and keep workshop clean. No longer worry about the powder jam at the bottom.

CMS Central Controller

1. One-of-kind design of integrating the monitoring panel and the control panel.

2. User-friendly interface and accurate control.

3. Operating and monitoring by a single personnel and can be linked with computer remote maintenance program to reach the most efficiency controlling mode.

4. Conveying time, material types, and pipe cleaning time of each station are adjusted by the control station.

5. Displaying panel shows you how each station, dryer, and storage silo work, such as on / off, full or lack of material, and material type of each station.

6. Extensive interface allows easy expansions up to 40 stations for future demands.

7. Compact and durable design.