PRM-TAIWÁN

Soluciones auxiliares de la máquina de moldeo por extrusión

Clasificación: Sistema automático
País: Taiwán
Teléfono: ENGLISH: 886-4-2271-0000 | 中文:886-4-22716999
Fax: 886-4-2271-1988
Persona de contacto: Bunny Tsai
Consulta Ahora

Somos capaces de ofrecer una amplia gama de equipos auxiliares específicos para máquinas de moldeo por extrusión, como secadores de tolva, secadores deshumidificadores, enfriadores, cristalizadores de PET, cargadores de vacío, controladores de temperatura de molde, dosificadores de master-bath y sistemas de dosificación y mezcla automáticos.

  1. Mejor imagen de empresa
  2. Mayor productividad
  3. Costo más bajo
  4. Mejor eficiencia energética
  5. Menos desperdicio de material y contaminación durante el proceso de transporte
  6. Mejor ambiente de trabajo
  7. Menos ruido debido a la separación de los sopladores del lugar de trabajo

Water Chiller (YBW ) 

  • Use the latest European,American or Japanese compressor,available in single and double compressors. The compressors of the double-compressor model can either run alone or together. 

  • High-efficient shell-pipe condenser which has heat-transmission function can save energy. 

  • Well-designed safety protection. It is also equipped with a digital temperature display indicator and abnormal warning indicators for the long lasting. 

  • Applied Machinery: oil temperature, ultrasonic ,high frequency machine/injection /extrusion/blow molding machine

 

 

 

Mold Temperature Controller (YBMI/YBMD) 

Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... 

P.I.D temperature controllers are used for accurate control of temperature within±1. 

Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. 

  • YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150 or above. 

  • YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150 or below.

 

 

 

Mighty Crusher (YBC)

  • Our crushers are applied to all types of plastic, rubber, resin, and other materials.
  • Large feed inlet can break most kinds of plastic or rubber scrap and waste material easily, bulk feeding more efficient, save labor cost and time.
  • The main structure is made of high quality steel. It is fracture-proof.
  • High-quality blades which increase motor’s efficiencies.
  • Able to open widely for better vision.
  • With patented(CHINA PAT. ZL200820119883.8) design,once the crusher required for maintenance or repair, the crusher will completely stop as the safety device is on and it is very safe for the operator to open the crusher to clean, check or maintain.

 

 

 

Instant Crusher (YBCS)

  • An instant recycling system can help you to cost down by recycling the sprues, waste material or defective products. YANN BANG Instant Crusher is also good to granulate long and thick material.
  • This series is perfect to locate next to a molding machine to recycle immediately.
  • With patented(CHINA PAT. ZL200820119883.8) design, once the crusher required for maintenance or repair, the crusher will completely stop as the safety device is on and it is very safe for the operator to open the crusher to clean, check or maintain.

 

 

Low-Speed Silence Crusher (YBCSS)

  • This series are suitable to granulate a small amount of sprues, waste material or defective products located next to your molding machine.
  • With low-speed and silence design, it can break evenly and quietly with less dust. Easy to clean and operate with multi safety device.
  • With patented(CHINA PAT. ZL200820119883.8) design, once the crusher required for maintenance or repair, the crusher will completely stop as the safety device is on and it is very safe for the operator to open the crusher to clean, check or maintain.

 

 

Floor Mounted Auto Vacuum Loader 

The separated design of a blower and a suction hopper with mighty horsepower is suitable for long distance conveying. The flexible combination of one blower with one suction hopper up to four suction hoppers can help you to save space and equipment investment cost. That also keeps your resin away the pollution and extend suction points easily for future need. 

  • TA series  

Easy use by a quiet and powerful induction motor. The motor cabinet can be placed on the floor for convenient operation and the suction hopper on the hopper dryer for easy installation.  

  • TB series 

Use the same commutator motor as the BC series, and separate motor cabinet and suction hopper design as the TA and TC series. Combine the advantages of the hopper mounted and floor mounted loaders. 

  • TC series 

  • The blowers are belt-driven that are the best choice for silent operation. 

 

  • Patented Optional Parts 

  • Vortex Cyclone (VC)Works with any auto loaders to stop the regrinded resin from discharging to the surrounding area. 

  • Filter Setoptional equipment from YANN BANG is perfect for dust-free of indoor working place. To do the filter routine maintenance is so easy without dirtying your hands and place. Unload the filter set without opening the cover until move to the please you want to clean. 

  • Auto Dust CleanerSaves your time and labor. No need to clean your filter anymore. The Auto Dust Cleaner is designed to install upon the filter of the loader. Set the timer and it cleans your filter routinely. 

 

 

 

Vortex Cyclone (VC)

Works with any auto loaders to stop the regrinded resin from discharging to the surrounding area. 

 

Gravimetric Auto Dosing & Mixing System (ADMG) 

  • COST SAVE: ADMG can measure powder resin, granule resin, master-batch, or additive precisely. 

  • EASY OPERATE: By entering the percentage of each batch and supply value to operate effectively, HMI automatically calculates all required values operate and monitor by single personnel or connect a PC through a modern to through a modern to maintain the system or solve problem. HMI is dynamic and versatile to provide the most efficient and economic operation. 

 

  • ACCURACY & CONSISTENCY: ADMG automatically measures the required amount accumulatively in order when you add extra resins or additives which will not affect the precision of dosing or mixing. 

  • ERROR REPORT: Error problems are recorded the time by day, month, and year for the maintenance. 

  • EASY CLEAN & SPACE SAVE: Stainless design and individual function units are easy to discharge and install. 

 

Suction Hopper 

  • Standard Series (HS) 

By negative pressure principle, convey the raw material into the hopper controlled by the limited switch. 

  • Glass series (GS) 

Fitted with a proximity switch to make the accurate control and the material supply easily observed. It can be mounted directly onto the molding machine and gives the operator a clear view of the loading through the sight glass. 

  • Stainless Series for Optics (HS-S/GS-S) 

The stainless suction hopper which is internal buffed is dust-free and best choice for optics industry. 

  • Powder Series (HSP) 

Working with a floor-type auto loader (TAE series) .It is the best choice for powder user. Available for powder, pellet or flake resin. Both new and recycled material are no problem. Special design to prevent dust and keep workshop clean. No longer worry about the powder jam at the bottom.